How to Remove the Mold on Car Mats?

Mold on your car mat can be very distracting! The good news is that you can remove the mold and smell it in about an hour, so don't stress too much.

 

 

3 Important Tips for Getting Rid of Car Mold

Clean the Interior of Your Car

If you find mold on your car mat, the first thing you should do is clean the inside of your car. Collect anything that is wet and clean these thoroughly to make sure there is no mold on them. Then, you should vacuum the interior of your car. Vacuuming helps to suck out mold spores and remove any other debris before you get into the clutter.

Try White Vinegar

An easy and chemical-free way to clean and kill mold in your car is to use white vinegar. This acid helps kill the mold and prevents it from reappearing by burning it. All you need to do is pour the vinegar into a spray bottle and mix it with some water. A good ratio is eight parts vinegar to two parts water. You can also mix it in a container and soak some rags in it.
You can choose to spot clean or spray and scrub a larger area. You do need to let the solution soak for no less than 15 minutes to make sure the mold is penetrated. If you are concerned about the smell of vinegar, roll down the window and let it air out for a few hours. Once dry, you can apply some baking soda and vacuum to remove any remaining odor.

Use Clove Oil

Essential oils are all the rage these days, and they have proven to be very effective in many situations. For example, one of the best ways to eliminate mold and mildew is to use clove oil. You can purchase this at supermarkets or health food stores. This oil can irritate the skin of young children or dogs; you will need to dilute it to avoid this. Simply mix the oil with some tap water.

Specific Steps

The first step in eliminating mold is to have the proper personal protective equipment. Make sure to wear.
Respirator or face mask
Rubber or latex gloves
Eyewear

After putting on temporary protective clothing, follow these steps to remove the mold from the car mat machine​.

Use a soft bristle brush or toothbrush to clean the mold area.
Vacuum the area to remove any spores.
Mix equal parts vinegar and water in a spray bottle.
Spray on the floor mat and let it sit for 10 to 15 minutes.
Vacuum any excess solution or water.
Sprinkle granular or powdered fungicide (e.g., borax) on the carpet.
Allow it to dry for 10 to 15 minutes.
Vacuum any remaining powder.
Wipe the area with a damp towel.
Open the window and let the vinegar smell dissipate.
As a final step, you may also want to turn on the heat or air conditioning. If you smell any odors, change your air filter. You can find it in the glove box or under the hood of your vehicle.

 

For more information about 5D Car Mat Hot Press Mould, please contact us. We will provide professional answers.